JULIO - JULIO HG

TECHNICAL DESCRIPTION

EXECUTIVE DESKS, EXTENSIONS AND MEETING TABLES

Consisting of tops (wood or glass) with metal structure.
Wooden tops are made of MDF fibreboard 25 mm thick with shaped perimeter edges. The visible part is covered with 3d-foil and the lower part is lacquered in melamine.
They are available in the following colours: OLMO GREY 12, FRASSINO BROWN 52, NOCE BALI 30, TEAK SAMOA 67, WHITE BR. 69.
Decorative T-shaped perimeter moulding 6 mm INOX GREY recessed in a special milling.
The tops of the meeting tables are equipped with integrated top access with "flip-top" opening in the same colour as the surface itself and under-top cable tray in 1 mm thick epoxy powder coated sheet metal.
The back-lacquered tempered glass tops, 12 mm thick, with polished edges, can be used only in combination with the metal structure and anchored to it by means of turned stainless steel supports. The glass tops are available in the following colours: TORTORA 72.
The metal frame is made of rectangular section tubular metal 50 x 25 mm 1,5 mm thick, treated with epoxy powder coatings in INOX GREY colour.
The legs are made of extruded aluminium, colour INOX GREY, with vertical cable-guide compartment that can be inspected by means of a removable casing. They have a structural steel core, thickness 3 mm, suitably shaped and drilled for anchoring to the frames and for the levelling feet. The decorations are made up of vertical profiles in shaped mdf, covered with 3d-foil, in the following colours: LAVA 14, OLMO GREY 12, FRASSINO BROWN 52, NOCE BALI 30, BIANCO BR.69. Finishing heads in printed abs INOX GREY.
The desks with metal structure can be equipped with modesty panels (optional) made of MDF wood fibre panels 18 mm thick covered with 3d-foil in the following colours: LAVA 14, OLMO GREY 12, FRASSINO BROWN 52, NOCE BALI 30, TEAK SAMOA 67, BIANCO BR. 69.

CIRCULAR MEETING TABLE WITH COLUMN BASE
Consisting of: metal top and base.
The wooden top is made of MDF wood fibre panel 25 mm thick with shaped perimeter edges. The visible part is covered with 3d-foil and the lower part is melamine faced.
Available in: OLMO GREY 12, FRASSINO BROWN 52, NOCE BALI 30, TEAK SAMOA 67, WHITE BR. 69.
Decorative T-shaped perimeter moulding 6 mm INOX GREY recessed in a special milling.
Metal base painted with epoxy powder INOX GREY, composed of: circular base Ø590mm, vertical tube and upper crossbar.
The vertical tube has a tapered section with base Ø128mm and top Ø89mm.
The crossbar is made of 4 mm thick metal sheet with slots for fixing under the top.

SERVICE CABINET ON FEET (UNDERCOUNTER OR FREESTANDING)
The internal structure is made of particle board panels 18 mm thick melamine faced in ANTRACITE 55 or WHITE BR. 69 finished with a melamine edge 0.4 mm thick, matching the surface.
Backs and sliding doors are made of MDF panels 18 mm thick, with the internal side faced and the visible parts covered in 3d-foil in the following colours: OLMO GREY 12, FRASSINO BROWN 52, NOCE BALI 30, TEAK SAMOA 67, BIANCO BR. 69.
The sliding doors are equipped with a soft closing mechanism.
The tops and end sides are made of 18 mm thick MDF type wood fibre panels with the internal side faced and the visible parts coated.
in 3d-foil in the following colours: LAVA 14, OLMO GREY 12, FRASSINO BROWN 52, NOCE BALI 30, TEAK SAMOA 67, BIANCO BR. 69.
The sides are rounded along the front and rear vertical sides.
The top is shaped along the entire perimeter with decorative perimeter molding T mm 6 color INOX GREY embedded in special milled. The structure rests on 5 adjustable height feet made of nylon.
The handles are made of die-cast metal in INOX GREY colour.
DRAWERS AND SERVICE FURNITURE
The internal structure is made of particle board panels 18 mm thick melamine faced in ANTRACITE 55 or WHITE BR. 69 ,
perimeter finished with melamine edge thickness 0.4 mm, matching the surface.
Backs and fronts made of 18 mm thick MDF fibreboard with the internal side covered in melamine and the visible parts covered in 3d-foil in the following colours: OLMO GREY 12, FRASSINO BROWN 52, NOCE BALI 30, TEAK SAMOA 67, BIANCO BR. 69.
The tops and end sides are made of 18 mm thick MDF fibreboard with the internal side faced with a 3d-foil covering in the following colours: LAVA 14, OLMO GREY 12, FRASSINO BROWN 52, NOCE BALI 30, TEAK SAMOA 67, BIANCO BR. 69.
The sides are rounded along the front and rear vertical sides.
The top is shaped along the entire perimeter with decorative perimeter molding T mm 6 color INOX GREY embedded in a special milled
The internal structure of the drawers consists of sides and bottom in fiber covered in black PVC that slide on metal guides with nylon bearings with limit switch on opening and self-closing on closing.
Drawer cabinets and service cabinets are equipped with a central locking system.
The structure rests on pivoting wheels made of nylon.
The handles are made of die-cast metal in INOX GREY colour.
MONOLITHIC FURNITURE
Consisting of the following elements:
>> sleeves with doors,
>> reversible bookcase element,
>> set with levelling base, top and finishing sides,
>> rear finishing panels (optional).
Structures The boxes are made of melamine faced wood particle board panels 18 mm thick, available in the following colours: ANTRACITE 55 and WHITE BR. 69, perimetrically finished with melamine edge mm 0,4 matching the surface.
Shelves made of particle board panels 25 mm thick melamine faced, available in the following colours: ANTRACITE 55 and WHITE BR. 69, perimetrically finished with ABS edge mm 2 matching the surface. They are equipped with concealed hardware, height adjustable with